.jpg)
Print Page
.gif)
For loads above 100 tons, where heat load fluctuates or for high return temperatures..gif)
.jpg)
CTS Series Cooling Tower
CTS Series Cooling Tower System
A Traditional Tower System
Cooling Technology’s PCTS Series Cooling Tower System is an open-loop system that provides for good heat transfer and stable plant operation.
Features
- Induced draft, cross flow type tower cell that is factory assembled and typically designed to cool 3 gpm of water per ton from 95°F to 85°F at the prevailing summer wet bulb conditions.
- An integrated fan cylinder and distribution basin on the top and a single piece collection basin on the bottom. Both are constructed of industrial grade rotomolded polyethylene.
- Pump/tank station has fully trimmed process pump and can also include a tower water recirculation pump. The tank is constructed of carbon or stainless steel and includes cover, site glass, drain and overflow.
- NEMA 4 electrical panel mounted on the pump/tank station that contains all fuses, overloads, contactors, switches and lights.
- Electronic temperature controller controls the fan motor to maintain water temperatures.
Typical Layout
1 Pump
Typical Layout
2 PumpsFor loads above 100 tons, where heat load fluctuates or for high return temperatures.
Options
- Common or individual standby pumps.
- Temperature, pressure, flow and water level alarms.
- Tower supports, handrail & ladder.
- SGF Series Sand and Gravel Filter.
- Dual-compartment tank for cold climates.
Contact Us
- Call: 800-872-1448
- Contact Us
- Request a Quick Quote™
Quality Components
Engineered for each application, the CTS Series Cooling Tower System consists of our PCT, NCT or ACT Series Cooling Tower Cells along with our WT Series Pump/Tank Station and all of the necessary piping and controls. This traditional tower system is the most cost-effective method for cooling chiller condenser, hydraulics or other plant wide cooling tower requirements.
Engineered for each application, the CTS Series Cooling Tower System consists of our PCT, NCT or ACT Series Cooling Tower Cells along with our WT Series Pump/Tank Station and all of the necessary piping and controls. This traditional tower system is the most cost-effective method for cooling chiller condenser, hydraulics or other plant wide cooling tower requirements.
Protect the Process
Because cooling towers are prone to water contamination, Cooling Technology recommends our optional SGF Series Sand and Gravel Filter.
Because cooling towers are prone to water contamination, Cooling Technology recommends our optional SGF Series Sand and Gravel Filter.