Contact Us

    Cooling Technology Inc
    1800 Orr Industrial Court
    Charlotte, NC 28213

    Phone: (704) 596-4109
    Fax: (704) 597-8697

    Contact Us

Home » Products » Compact Chillers » LPCA SeriesPrint Page

LPCA Series Chiller

Our Most Affordable and Compact Cooling Solution
Ultra Compact Indoor Air-Cooled, 1 to 20 tons

Designed for indoor location, Cooling Technology’s LPCA Series is a turnkey indoor air-cooled chiller that comes complete with an integrated pump/tank. At dimensions as small as 30”Wx39”Lx61.5”H, the LPCA Series can fit into virtually any small space!

Features

  • Highly-efficient Type 316 stainless steel plate evaporator, featuring ridged patterns that are brazed together to form two separate channel systems, allowing the refrigerant and fluid to flow in counter directions.
  • Reducing refrigerant requirements, a brazed plate design allows for closer approach temperatures and more efficient heat transfer than shell and tube models.
  • An inline strainer with removable stainless steel screen protects the evaporator from contamination.
    A vented insulated tank features sight glass, drain and make-up connection.
  • All electrical components are mounted in a NEMA 4 electrical panel that is professionally wired and numbered to correspond with the schematic.
  • Completely insulated with closed cell foam, our design approach conserves energy.
  • Depending on cooling requirements and refrigerant type, Cooling Technology selects the best available scroll, reciprocating or screw compressor.
  • The LPCA Series is constructed with non-ferrous piping to ensure clean process water and a corrosion-free environment.
  • To monitor and regulate system temperature, the LPCA Series uses a electronic temperature controller that displays both set point and actual fluid temperature.
  • Other standard controls and indicators include power, pump, compressor and no flow.
  • An end-suction stainless steel centrifugal pump – trimmed with a discharge throttling valve to permit adjustment of flow rate – features a closed-couple TEFC motor and provides high fluid flow at high pressure.
  • A liquid-filled pressure gauge offers  reliable pump pressure readings without fluctuations.
  • Swivel casters .that enable you to easily move the unit.
LPCA Series Industrial Chiler

Options

  • Hot gas capacity control.
  • Automatic water make-up.
  • Coolant low-level alarm.
  • High temperature alarm.

Downloads

Contact Us

USER-FRIENDLY
Cooling Technology’s easy-to-use standard microprocessor controller offers a wide setpoint temperature range, from -58°F to 194°F.
 
CLEAN & EFFICIENT
All Cooling Technology water piping is manufactured with non-ferrous material to ensure clean process water and a corrosion-free environment. Completely insulated with closed cell foam, our design approach conserves energy.
 
SAFETY COMES STANDARD
Cooling Technology’s standard safety mechanisms include a high refrigerant pressure relief valve, automatic high and low refrigerant pressure cut-off, and—on the process side—low flow cut-off and freeze protection.
 
QUALITY IS OUR CUSTOM
From the best available compressors to our NEMA 4 electrical panels and everything in between, Cooling Technology systems are constructed with quality.
 
READY TO RUN
All Cooling Technology chillers are fully-wired, fully-charged, and factory tested under load conditions to ensure easy installation and successful start-up.