WT Series Pump/Tank Station

WT Series Pump/Tank Station

Our Water Tank designs range from 150 to 5,000 gallons+ and are offered in carbon steel, stainless steel or MDPE Medium Density PolyEthylene.  The WT series tanks aer custom designed with or without a baffle and sized to accomodate a variety of pump configurations.  SEveral option scan be added to the tank for ease of operation.  

DURABLE & DEPENDABLE
All WT Series Pump/Tank Station components are mounted to a heavy-gauge solid deck.

Features

• Available in 1/4” Carbon or 3/16” Stainless Steel plates or MDPE Medium Density PolyEthylene.
• Internal coal tar epoxy coating.  Polyurea Polycoat is available as an option for the carbon steel tanks. 
• NEMA-rated control panel to synchronize pump and tank services.
• Pump motor with electrical contactor and overload that includes start & stop buttons, fuses and pilot lights.
• Closed-coupled process pump including full-flow valves and headers reduce pressure drop and sized to assure laminar flow.
• To ensure total water turnover, pump suction ends are extended into the tank and are cut at a 45° angle to prevent vortexing and cavitation.
• A butterfly valve at the pump suction permits pump removal for replacement or service without the need to drain or stop the entire system.
• A flow-balancing valve at the pump discharge completes the trim to provide pump operation at the design rate of flow.
• Process pumps also include check valve in the discharge line to prevent drain back and allow higher operating volume as well as a liquid-filled pressure gauge to indicate pump discharge pressure.
• Cooling Technology’s unique bottom drain with ball valve minimizes solids and allows full drainage.